SAMARPAN
ENGINEERING & MARKETING PVT LTD

Bringing Technological Innovations at Your Doorstep

Profile Projectors
 
Sipcon Instrument Industries

Sipcon was established in 1971 as industrial division of GETNER  Group - Sipconn offers a comprehensive and superior lineup of quality profile projectors , vision measuring systems, industrial vision inspection solutions and co-ordinate measuring machines.

Profile Projector with Co-Axial lenses SPN-300

 

S.No.SpecificationsSPN-300
1Screen300mm
1.1Standard - Opaque glass screen with 90 degree cross line, Fitted on rotary ring operated by knob.
1.2Optional - Electronic Protractor switchable degree / decimal .01 deg / 1min. Display Range: ±360 deg Abs. Inc, zero setting.
2CO-AXIAL OPTICS WITH BUILT IN HALF REFLECTIVE MIRROR
2.1Standard10X, 20X
2.2Optional50X / 100X
2.3MountTurret mount with click stop
3WORKSTAGE SIZE250 x 250mm
4MEASURING RANGE100 x 100mm
5LINEAR MEASUREMENTSWith QC-200 or PC based software
6FOCUSING100mm
7.1PROJECTION ACCURACY Contour±0.05%
7.2Surface±0.075%
8ILLUMINATION
8.1Contour: 24 V/150 W halogen lamp with illumination control. Built-in condenser unit provides light as per objective.
8.2Surface: 24 V / 150 W Halogen lamp provides shadowless light on optical axis
9STAND: Unique rigid pedestal system facilities vibration free handling of component
10COOLING SYSTEMFAN
11OPTIONAL HARDWAREOPTIONAL SOFTWARE
 Motorised X,Y and focusing with speed controlDia View: D.R.O. system with L.C. 0.001/0.005 mm.
 Workstage for D.R.O.: Travel 150 x150mm / 200 x100mm / 200 x150mm / 200 x 200mmQC220 : Geometrical readout System, opto Edge Sensor
 Profile charts, Rotary table, V-block, Centre holding device opto Edge Sensor for accurate measurementQC5000/ SIPMEAS : PC based geometrical readout System, with graphical representation. Simple CAD interface.

 

Horizontal Profile Projectors

 

S.No.SpecificationsSH-300SH-400SH-600 / 800
1Screen300mm400mm600 / 800 mm
1.1Standard : Opaque glass screen with 90 degree cross line, Fitted on rotary ring operated by knob.
1.2Optional : Electronic Protractor switchable degree / decimal .01 deg / 1min. Display Range: 360 deg Abs. Inc, zero setting.
2OPTICS
2.1Standard10X, 20X, 100X10X, 20X10X, 20X
2.2Optional50X25X, 50X, 100X25X, 50X, 100X
2.3MountTurret Mount with click stop
3WORKSTAGE SIZE400 x 150mm450 x 200mm500 x 200mm
4MEASURING RANGE200 x 100mm300 x 100mm300 x 150mm
6FOCUSING75mm100mm100mm
7HELIX ANGLE± 12 Degree
8MEASURING SYSTEMBuilt In glass scale with D.R.O
9.1PROJECTION ACCURACY Contour±0.05%±0.05%±0.05%
9.2Surface±0.075%±0.075%±0.075%
9ILLUMINATION
10.1Contour: 24 V/150 W halogen lamp with illumination control. Built-in condenser unit provide light as per objective.
10.2Surface:24 V / 150 W Halogen lamp provides shadowless light on optical axis
11STAND: Unique rigid pedestal system facilities vibration free handling of component
12CONDENSORTwo adjustable condensor unit fitted on turret
13COOLING SYSTEMFAN
 OPTIONAL HARDWAREOPTIONAL SOFTWARE
Motorised X,Y and focusing with speed controlDia View: D.R.O system with L.C. 0.001 / 0.005 mm
Workstage for bigger sizes also available.QC220 : Geometrical readout System, opto Edge Sensor
Profile charts, Rotary table, V-block, Centre holding device
opto Edge Sensor for accurate measurement
QC5000/SIPMEAS : PC based geometrical readout System,
with graphical representation. Simple CAD interface.

 

Vertical Profile Projectors

 

S.No.SpecificationsSV-300SV-400SV-600/800
1Screen300mm400mm600mm/800mm
1.1Standard : Opaque glass screen with 90 degree cross line Fitted on rotary ring operated by knob.
1.2Optional : Electronic Protractor switchable degree / decimal .01 deg / 1min. Display Range: 360 deg Abs. Inc, zero setting.
2OPTICS
2.1Standard10X10X, 20X10X, 20X
2.2Optional20X, 50X, 100X25X, 50X, 100X25X, 50X, 100X
2.3MountScrew MountTurret mount with click stop
3WORKSTAGE SIZE160 x 160mm200 x 200mm200 x 200mm
4MEASURING RANGE50 x 50mm75 x 75mm75 x 75mm
5LINEAR MEASUREMENT0-25mm Micrometer
L.C. 0.001 mm
0-50mm zero adjustment
Micrometer L.C. 0.001 mm
6FOCUSING100mm100mm100mm
7.1PROJECTION ACCURACY Contour±0.05%±0.05%±0.05%
7.2Surface±0.075%±0.075%±0.075%
8ILLUMINATION
8.1Contour: 24 V/150 W halogen lamp with illumination control. Built-in condenser unit provide light as per objective.
8.2Surface: 24 V / 150 W Halogen lamp provides shadowless light on optical axis
9STAND: Unique rigid pedestal system facilitates vibration free handling of component
10COOLING SYSTEMFAN
11OPTIONAL HARDWAREOPTIONAL SOFTWARE
Motorised X,Y and focusing with speed controlDia View: D.R.O system with L.C. 0.001/0.005 mm
Workstage for D.R.O.: Travel 150 x150mm / 200 x100mm /
200 x150mm / 200 x 200mm
QC220: Geometrical readout System, opto Edge Sensor
Profile charts, Rotary table, V-block, Centre holding device
opto Edge Sensor for accurate measurement
QC5000/SIPMEAS: PC based geometrical readout System,
with graphical representation. Simple CAD interface.

 

Bench Top Profile Projectors

S.No.SpecificationsSP-250SP-300SP-400
1Screen250mm300mm400mm
1.1Standard : Opaque glass screen with 90 degree cross line, Fitted on rotary ring operated by knob.
1.2Optional : Electronic Protractor switchable degree / decimal .01 deg / 1min. Display Range: ± 360 deg Abs. Inc, zero setting.
2OPTICS Standard10X10X, 20X, 100X10X, 20X
2.2Optional20X, 50X, 100X50X25X, 50X, 100X,
2.3MountScrew MountTurret mount with click stop
3WORKSTAGE SIZE160 x 160mm160 x 160mm200 x 200mm
4.MEASURING RANGE50 x 50mm50 x 50mm75 x 75mm
5LINEAR MEASUREMENTS0-25mm Micro
meter L.C. 0.001mm
0-50mm Micrometer head with zero adjustment L.C. 0.001mm
6FOCUSING100mm100mm100mm
7.1PROJECTION ACCURACY
Contour
±0.05%±0.05%±0.05%
7.2Surface±0.075%±0.075%±0.075%
8ILLUMINATION
8.1Contour: 24 V/150 W halogen lamp with illumination control. Built-in condenser unit provide light as per objective.
8.2Surface: 24 V / 150 W Halogen lamp provides shadowless light on optical axis
9STAND: Unique rigid pedestal system facilitates vibration free handling of component
10COOLING SYSTEMFAN
11OPTIONAL HARDWAREOPTIONAL SOFTWARE
 Motorised X,Y and focusing with speed controlDia View: D.R.O system with L.C. 0.001 /0.005 mm
Workstage for D.R.O.: Travel 100 x100mm / 150 x150mm / 200 x100mm / 200 x 150mm/ 200 x 200mmQC220 : Geometrical readout System, opto Edge Sensor
 Profile charts, Rotary table, V-block, Centre holding device opto Edge Sensor for accurate measurementQC5000/SIPMEAS : PC based geometrical readout System, with graphical representation. Simple CAD interface.

 

Tool Inspector

Tool inspector is used for the measurement of Drilling side milling cutter, end mill and special cutter.

 

Vision Measuring System SVI-IMG Series

 

Optical Coordinate Measuring System 

 

  • Granite table confirming to DIN 876 standards ensure perfect flatness of table. 
  • Powerful, flexible software for easy-to-use programming and customization.
  • Automatic Video edge detection.
  • High resolution parafocal zoom lenses.
  • Hollow Z-axis structure reduces distortion of its own.
  • Drive systems provide faster and better motion capability.
  • Highly suitable for large size PCB inspection and or sheet metal components.
  • Flat field High Resolution Optics for sharp uniform images.
  • Unmatched illumination flexibility for difficult measurements.
  • Options of touch probe and laser probe improves the 3d measuring capabilities of the machine.
 
 

 

Special Purpose Microscope

Available in both manual and CNC versions. Fully versatile high precision measuring microscope.

 

Recent Photos

Recent Events